Northam Hospital

loading...

Northam Hospital Demolition

Client: Windsor Knight Pty Ltd

Location: Northam, WA

Duration: February 2016 – August 2016

Project Description:

The old Northam Hospital was a seven-level reinforced concrete structure, including two basement levels, constructed using a column and slab system. The complex consisted of a main block with an adjoining wing.

The buildings ranged in height from approximately 18 to 21 metres, comprising up to seven storeys with service core overruns. All structures were in-situ reinforced concrete column and slab construction, incorporating oversized floor reinforcement and 240 mm-thick slabs designed to meet earthquake protection requirements.

External walls were brick-clad to full height, with a 1.5 m deep × 0.5 m reinforced concrete ring beam extending around the full perimeter of all high-rise elements, providing additional structural integrity.

Scope of Works:

Mainilne was engaged by Windsor Knight to demolish and remove all buildings, structures and improvements, including a general clean-up of the site in preparation for new construction of a proposed shopping complex.

The works included:

  • Disconnect services and piping above and below ground, including, but not limited to, water, reticulation, electrical, communications, sewerage, storm-water and gas
  • Minor excavation earthworks and site clearance of vegetation
  • Removal of building structural frame, ground slabs, footings, basement and pavements
  • Pump out contents of and remove septic tanks, soak-wells and leach drains
  • Septic tanks, sewer connections, soak-wells, leach drains, sanitary plumbing
  • Recycling of all concrete for reuse onsite

Equipment deployed:

  • 110-tonne excavator
  • 40-tonne excavator
  • 30-tonne excavator
  • 22-tonne excavator
  • 740 dump truck
  • Bobcat and mini-breaker (minor works)
  • Small Tipper, service and general use truck
  • Long-reach demolition arm
  •  Water Truck
  •  14 tonne vibe drum roller
  •  D10 Tracked Dozer
  •  988 / 950 loader
  • Loaders
  • Crushing and screening equipment
  • Various excavator attachments including magnet, grapple, breaker and buckets

Project Highlights:

  • Successfully demolished structure with a 2,600 m² footprint without the use of explosives.
  • Removed and disposed of contaminants prior to demolition, including asbestos, PCBs, and other hazardous materials.
  • Recycled all remaining building elements following contaminant removal.
  • All concrete and brick crushed to Main Roads specification <19mm for reuse onsite. Approximately 30,000 tonnes.

 

Other Industrial

loading...
  • Industrial

Pemberton Timber Mill

Pemberton Timber Mill Demolition Client: Parkside Group & Thuroona Services Location: Pemberton, WA Duration: May 2024 – July 2024 &...

Pemberton Timber Mill
loading...
  • Industrial

Wittenoom Townsite Demolition

Wittenoom Townsite Demolition Client: Thuroona Services Location: Wittenoom, WA Duration: April 2023 – May 2023 Project Description: The Wittenoom townsite...

Wittenoom Townsite Demolition
loading...
  • Industrial

CBH Q-Type Storage Roof Removal

CBH Q-Type Storage Roof Removal Client: Q Design & Construct Location: Cascade, WA Duration: April 2023 – May 2023 Structure...

CBH Q-Type Storage Roof Removal

Award-winning Demolition Experts

We’ve won a significant number of awards, both in Australia and internationally. Our awards recognise our innovative methodologies and solutions that solve high risk challenges and deliver best in class solutions.

Read More

Contact

If you’d like to discuss your project, whether it’s small, large, or complex, feel free to send us a message or give us a call.

Contact Our Office

+61 08 62414100
admin@mainline.au
PO Box 590, Balcatta WA 6914

Send Us a Message

"*" indicates required fields